
NBSN95
Waterproof Long Range Wireless NB-IoT Sensor Node
NBSN95 is a Long Range NB-IoT Sensor Node. It is designed for outdoor data logging and powered by Li/SOCl2 battery for long term use and secure data transmission. It is designed to facilitate developers to quickly deploy industrial level NB-IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere. NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage. NBSN95 uses STM32l0x chip from ST, STML0x is the ultra-low-power STM32L072xx microcontrollers incorporate the connectivity power of the universal serial bus (USB 2.0 crystal-less) with the high-performance ARM® Cortex®-M0+ 32-bit RISC core operating at a 32 MHz frequency, a memory protection unit (MPU), high-speed embedded memories (192 Kbytes of Flash program memory, 6 Kbytes of data EEPROM and 20 Kbytes of RAM) plus an extensive range of enhanced I/Os and peripherals. NBSN95 is an open source product, it is based on the STM32Cube HAL drivers and lots of libraries can be found in ST site for rapid development.
Features
- STM32L072xxxx MCU
- NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
- Pre-load bootloader on USART1/USART2
- MDK-ARM Version 5.24a IDE
- I2C, LPUSART1, USB, SPI2
- 3x12bit ADC, 1x12bit DAC
- 20xDigital I/O
- Open-source hardware / software
Thermal Anemometer
Range: 0~5/10/30m/s
1000mAh Rechargeable Battery
External DC power adapter
wireless OTA update firmware
Application guide
Choose the airflow range by deployment scenario

Cold Storage & Display Cases
For supermarket chillers, refrigerated display cases, cold storage deadzone detection, VAV terminals, and clean rooms.

HVAC Ducts & AHU Verification
For HVAC supply or extract ducts, filter pressure-drop monitoring, and air handling unit performance checks.

Industrial Ventilation & Fan Outlets
For main duct airflow, fan outlets, compressed air systems, and industrial ventilation monitoring.
How it works
Remote airflow monitoring via LoRaWAN
Deploy AirFlow-LN at critical airflow points, transmit measurements through a LoRaWAN gateway, and use platform data to detect weak airflow, filter problems, or abnormal ventilation conditions earlier.
- AirFlow-LN measures airflow in ducts, refrigeration, or ventilation points.
- LoRaWAN gateway receives data from distributed sensors across the site.
- Cloud platform visualizes trends and helps trigger maintenance decisions.


Product inquiry
Need help choosing the right NBSN95?
Contact us for NBSN95 pricing, datasheet, deployment advice, or integration support.





